Hikvision Digital Technology DS-2AE5154-A User Manual download pdf (Page 19)

User Manual of E Series 5-inch Speed Dome

 Configure the zoom speed.

Purpose:

You can define the speed at which the lens changes from full wide zoom to the optical zoom.

Steps:

(1) Move the cursor to ZOOM SPEED using the direction buttons and click IRIS+ to enter.

(2) Click up/down direction buttons to choose the speed from HIGH (default), MEDUIM and

LOW.

(3) Click IRIS+ button to confirm.

Task 3: Configure the Day/Night mode.

There are two parameters available for day/night mode configuration.

(1) IR cut filter. It can be set as AUTO, DAY or NIGHT.

AUTO: The speed dome is capable of automatically switching from Black and White mode

(NIGHT) and Color mode (DAY) regarding to the lightening conditions. It is the default mode.

NIGHT (B/W): You can switch the IR cut filter into Black and White mode to increase then

lens sensitivity in low light conditions

DAY (Color): You can switch it to DAY mode in normal lighting conditions.

Note: You can set the IRCUT FILTER value on this menu, and you can call preset 39 to set the

IR cut filter mode to DAY mode and call preset 40 to set it as NIGHT mode.

(2) D/N level. The D/N level is the light level for auto D/N mode switch. As a dividing line, IR cut

filter switches between DAY and NIGHT when the light condition reaches the user-defined

D/N level. Three levels are selectable: HIGH, MID (default) and LOW.

Note: D/N level configuration varies according to the different camera models. Some

models don’t support user-defined D/N level.

Task 4: Configure the sharpness level.

The sharpness function can increase the gain of the image and sharpen the edges in the picture

to enhance the picture details. You can set the SHARPNESS level from 0 to 15.

Task 5: Configure the BLC and WDR.

There are two parameters available for BLC and WDR configuration on this menu.

(1) BLC/WDR. You can set the value as ON or OFF to enable or disable the functions.

(2) BLC LEVEL. You can manually adjust the backlight compensation level.

Note: BLC level configuration varies according to the different camera models. Some models

don’t support user-defined BLC level.

Task 6: Configuring the iris, gain and shutter speed

 Set the AE Mode

Purpose:

AE mode defines the priority of iris, shutter and gain while the speed dome adjusting the

brightness of the live view. You can change the mode on AE MODE submenu.

AUTO: Auto iris, auto shutter and auto gain. The speed dome adjusts the values automatically

responding to the lighting conditions. It is the default mode.

IRIS: User-defined iris value, auto shutter and auto gain. It is the iris-priority mode. Please

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

No comments

Hikvision Digital Technology DS-2AE5154-A User Manual Page 19