Hikvision Digital Technology DS-2AE5154-A User Manual download pdf (Page 27)

User Manual of E Series 5-inch Speed Dome

You can set IMAGE FREEZE as ON or OFF to enable or disable this function.

Note: The function varies according to the different camera models.

 PTZ speed

Purpose:

You can define the speed of the dome movements.

(1) DOME SPEED: The manual movement speed of the dome can be set from level 1 to 5.

(2) SCAN SPEED: The scan speed defines the scan degree per second of pan scan, tilt scan, frame

scan, random scan and panoramic scan. The scan speed is adjustable from level 1 to level 40 and

the higher the level is, the faster the scan speed is.

(3) PRESET SPEED: The speed of calling a preset can be set from level 1 to 8. The higher level

corresponds to the faster speed to call a preset.

 Limit stops

Purpose:

The limit stops are user-configurable stops which limit the panning and tilting area of the speed

dome. There are left, right, up and down limit stops to define an area.

Steps:

1. Move the cursor to LIMIT STOPS and click FOCUS+ to set it ON to enable this feature. Click IRIS+

to confirm the new settings.

2. Move the cursor to SETTING STOPS and click IRIS+. You will see the message SET LEFT LIMIT on

the screen.

3. Click the direction buttons in the PTZ panel to configure the left limit stop. Click IRIS+ to confirm

the new settings.

4. Follow the prompts to configure the right, up and down limit stops on the menu.

Note: The new limit stops will overwrite the existed ones by default.

5. You can clear the defined limit stops. Click IRIS+ to enter CLEAR STOPS and click IRIS+ again to

clear the stops.

 Elevation set

You can set ELEVATION SET as ON to increase the elevation angle range of the speed dome or set it

as OFF to disable the function.

Note: The range of the elevation angle is -5-90° by default and it changes to -2°-90° when the

ELEVATION SET is set as ON.

3.4.2 Configuring Presets

Purpose:

A preset is a user-defined monitoring position/point. You can simply call the preset number to

change the monitor scene to the defined position.

Steps:

1. Move the cursor to enter preset configuration submenu:

MAIN MENU > DOME SETTINGS > PRESETS

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

No comments

Hikvision Digital Technology DS-2AE5154-A User Manual Page 27