Hikvision Digital Technology DS-2AE5154-A User Manual download pdf (Page 31)

User Manual of E Series 5-inch Speed Dome

3. Edit the pattern.

Steps:

(1) Move the cursor to EDIT PATTERN and click IRIS+ to enter edit mode.

REMAIN MEMORY 100

DONE: OPEN

QUIT: CLOSE

Figure 3-17 Edit the Pattern

(2) Click the PTZ control buttons and direction buttons to operate the speed dome to draw a

movement path, including pan scan, tilt scan, zoom in, zoom out, etc. The speed dome can

automatically memorize the path you operated as a pattern.

(3) Click IRIS+ again to save the pattern and exit edit mode.

Notes:

 REMAIN MEMORY indicates the remaining memory of the speed dome for configuring the

patterns. When it reaches 0, no more patterns can be configured. You can also see the

remaining memory shown under PATTERNS menu as REMAINING.

 The pan/tilt movements and the lens operations cannot be memorized simultaneously.

4. Preview the pattern.

Enter the PREVIEW menu to preview the current pattern.

5. Call the defined pattern.

You can call the special presets to call the defined pattern. E.g. call preset 41 to call pattern 1.

Please refer to Section 2.3 to find the corresponding preset number for each pattern.

6. Delete the patterns.

To Delete a Chosen Pattern

Click IRIS+ to enter EIDT PATTERN and you can see DEL PATH ABOVE. Click IRIS+ to delete the

pattern.

Note: If you delete the current pattern, the following pattern will also be deleted. E.g., if pattern

2 is deleted, pattern 3 and pattern 4 will be deleted as well.

To Clear All the Patterns

Enter CLEAR PATTERN menu and click IRIS+ to delete all the defined patterns.

3.4.5 Configuring Time Tasks

Purpose:

A time task is a preconfigured action that can be performed automatically at a specific date and

time.

Steps:

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

No comments

Hikvision Digital Technology DS-2AE5154-A User Manual Page 31