Hikvision Digital Technology DS-2AE5168N-A User Manual download pdf (Page 16)

User Manual of Network Speed Dome

Figure 2-4 Accessing the Speed Dome through Router with Static IP

 Connecting the network speed dome with static IP directly

You can also save the static IP in the speed dome and directly connect it to the

internet without using a router. Refer to Section 2.1.2 Detecting and Changing the IP

Address for detailed IP address configuration of the speed dome.

Figure 2-5 Accessing the Speed Dome with Static IP Directly

2.2.2 Dynamic IP Connection

Before you start:

Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect

the network speed dome to a modem or a router.

 Connecting the network speed dome via a router

Steps:

1. Connect the network speed dome to the router.

2. In the speed dome, assign a LAN IP address, the subnet mask and the gateway.

Refer to Section 2.1.2 Detecting and Changing the IP Address for detailed LAN

configuration.

3. In the router, set the PPPoE user name, password and confirm the password.

4. Set port mapping. E.g. 80, 8000 and 554 ports. The steps for port mapping vary

depending on different routers. Please call the router manufacturer for assistance

with port mapping.

Note: Refer to Appendix 2 for detailed information about port mapping.

5. Apply a domain name from a domain name provider.

6. Configure the DDNS settings in the setting interface of the router.

7. Visit the speed dome via the applied domain name.

 Connecting the network speed dome via a modem

Purpose:

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 102 103

No comments

Hikvision Digital Technology DS-2AE5168N-A User Manual Page 16