Hikvision Digital Technology DS-2AE5168N-A User Manual download pdf (Page 36)

User Manual of Network Speed Dome

2. Click the checkbox of Enable Limit and choose the limit type as manual stops or

scan stops.

 Manual Stops:

When manual limit stops are set, you can operate the PTZ control panel

manually only in the limited surveillance area.

 Scan Stops:

When scan limit stops are set, the random scan, frame scan, auto scan, tilt scan,

panorama scan is performed only in the limited surveillance area.

Note: Manual Stops of Limit Type is prior to Scan Stops. When you set these two

limit types at the same time, Manual Stops is valid and Scan Stops is invalid.

3. Click the PTZ control buttons to find the left/right/up/down limit stops; you can

also call the defined presets and set them as the limits of the dome.

4. Click Set to save the limits or click Clear to clear the limits.

5.4 Configuring Scheduled Tasks

Purpose:

You can configure the network dome to perform a certain action automatically in a

user-defined time period.

Steps:

1. Enter the Scheduled Task Settings interface:

Configuration> Advanced Configuration> PTZ > Scheduled Tasks

Figure 5-4 Configure Scheduled Tasks

2. Check the checkbox of Enable Scheduled Task.

3. Set the Park Time. You can set the park time (a period of inactivity) before the

dome starts the scheduled tasks.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 102 103

No comments

Hikvision Digital Technology DS-2AE5168N-A User Manual Page 36