Hikvision Digital Technology DS-2AE5168N-A User Manual download pdf (Page 46)

User Manual of Network Speed Dome

2. Configure the NIC settings, including the IPv4 Address, IPv4 Subnet Mask and

IPv4 Default Gateway.

3. Click to save the above settings.

Notes:

 If the DHCP server is available, you can check to automatically obtain

an IP address and other network settings from that server.

 The valid value range of Maximum Transmission Unit(MTU) is 500 ~ 9676. The

default value is 1500.

 The Multicast sends a stream to the multicast group address and allows multiple

clients to acquire the stream at the same time by requesting a copy from the

multicast group address.

Before utilizing this function, you have to enable the Multicast function of your

router and configure the gateway of the network speed dome.

 If the DNS server settings are required for some applications (e.g., sending

email), you should properly configure the Preferred DNS Server and Alternate

DNS server.

Figure 6-8 DNS Server Settings

6.3.2 Configuring Port Settings

Purpose:

If there is a router and you want to access the speed dome through Wide Area

Network (WAN), you need to forward the 3 ports for the speed dome.

Steps:

1. Enter the Port Settings interface:

Configuration > Basic Configuration > Network > Port

Or Configuration > Advanced Configuration > Network > Port

Figure 6-9 Port Settings

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 102 103

No comments

Hikvision Digital Technology DS-2AE5168N-A User Manual Page 46