Hikvision Digital Technology DS-2AE5168N-A User Manual download pdf (Page 56)

User Manual of Network Speed Dome

Figure 6-23 Configure Video Settings

2. Select the Stream Type of the speed dome to main stream (normal) or

sub-stream.

The main stream is usually for recording and live viewing with good bandwidth,

and the sub-stream can be used for live viewing when the bandwidth is limited.

Refer to the Section 6.1 Configuring Local Parameters for switching the main

stream and sub-stream for live viewing.

3. You can customize the following parameters for the selected main stream or

sub-stream:

Video Type:

Select the stream type to video stream, or video & audio composite stream. The

audio signal will be recorded only when the Video Type is Video & Audio.

Resolution:

Select the resolution of the video output.

Bitrate Type:

Select the bitrate type to constant or variable.

Video Quality:

When bitrate type is selected as Variable, 6 levels of video quality are selectable.

Frame Rate:

The frame rate is to describe the frequency at which the video stream is updated

and it is measured by frames per second (fps). A higher frame rate is

advantageous when there is movement in the video stream, as it maintains

image quality throughout.

Max. Bitrate:

Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the

higher video quality, but the higher bandwidth is required.

Video Encoding:

The Video Encoding standard can be set to H.264 or MJPEG.

Profile:

You can set the profile level to High Profile, Main Profile or Basic Profile.

I Frame Interval:

Set the I-Frame interval from 1 to 400.

4. Click to save the settings.

6.4.2 Configuring Audio Settings

Steps:

1. Enter the Audio Settings interface

Configuration > Basic Configuration > Video / Audio > Audio

Or Configuration > Advanced Configuration > Video / Audio > Audio

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 102 103

No comments

Hikvision Digital Technology DS-2AE5168N-A User Manual Page 56