Hikvision Digital Technology DS-2AE5168N-A User Manual download pdf (Page 17)

User Manual of Network Speed Dome

This speed dome supports the PPPoE auto dial-up function. The speed dome gets a

public IP address by ADSL dial-up after the speed dome is connected to a modem.

You need to configure the PPPoE parameters of the network speed dome. Refer to

Section 6.3.3 Configuring PPPoE Settings for detailed configuration.

Figure 2-6 Accessing the Speed Dome with Dynamic IP

Note: The obtained IP address is dynamically assigned via PPPoE, so the IP address

always changes after rebooting the speed dome. To solve the inconvenience of the

dynamic IP, you need to get a domain name from the DDNS provider (E.g.

DynDns.com). Please follow below steps for normal domain name resolution and

private domain name resolution to solve the problem.

 Normal Domain Name Resolution

Figure 2-7 Normal Domain Name Resolution

Steps:

1. Apply a domain name from a domain name provider.

2. Configure the DDNS settings in the DDNS Settings interface of the network speed

dome. Refer to Section 6.3.4 Configuring DDNS Settings for detailed

configuration.

3. Visit the speed dome via the applied domain name.

 Private Domain Name Resolution

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 102 103

No comments

Hikvision Digital Technology DS-2AE5168N-A User Manual Page 17