Hikvision Digital Technology DS-2AE5168N-A User Manual download pdf (Page 34)

User Manual of Network Speed Dome

5.2 Configuring Basic PTZ Parameters

Purpose:

You can configure the basic PTZ parameters, including proportional pan, preset

freezing, preset speed, etc.

1. Enter the Basic PTZ Parameter Configuration interface:

Configuration > Advanced Configuration > PTZ > Basic

Figure 5-2 Basic PTZ Configuration Interface

2. Configure the following settings:

 Basic Parameters: Enable/disable proportional pan and preset freezing, set the

preset speed, keyboard control speed, and auto scan speed.

 Proportional Pan: If you enable this function, the pan/tilt speeds change

according to the amount of zoom. When there is a large amount of zoom, the

pan/tilt speed will be slower for keeping the image from moving too fast on

the live view image.

 Preset Freezing: This function enables the live view to switch directly from

one scene defined by a preset to another, without showing the middle areas

between these two, to ensure the surveillance efficiency. It can also reduce

the use of bandwidth in a digital network system.

Note: Preset freezing function is invalid when you calling a pattern.

 Preset Speed: You can set the speed of a defined preset from 1 to 8.

 Keyboard Control Speed: Define the speed of PTZ control by a keyboard as

Low, Normal or High.

 Auto Scan Speed: The dome provides 5 scan modes: auto scan, tilt scan,

frame scan, random scan and panorama scan. The scan speed can be set from

level 1 to 40.

 PTZ OSD: Set the on-screen display duration of the PTZ status.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 102 103

No comments

Hikvision Digital Technology DS-2AE5168N-A User Manual Page 34