Hikvision Digital Technology DS-2AE5168N-A User Manual download pdf (Page 82)

User Manual of Network Speed Dome

Figure 7-7 Record Schedule

5. Choose the day to set the record schedule.

(1) Set all-day record or segment record:

 If you want to configure the all-day recording, please check the All Day

checkbox.

 If you want to record in different time sections, check the Customize

checkbox. Set the Start Time and End Time.

Note: The time of each segment can’t be overlapped. Up to 4 segments can

be configured.

(2) Select a Record Type. The record type can be Normal, Motion Detection,

Alarm, Motion | Alarm, Motion & Alarm.

 Normal

If you select Normal, the video will be recorded automatically according to

the time of the schedule.

 Record Triggered by Motion Detection

If you select Motion Detection, the video will be recorded when the

motion is detected.

Besides configuring the recording schedule, you have to set the motion

detection area and check the checkbox of Trigger Channel in the Linkage

Method of Motion Detection Settings interface. For detailed information,

please refer to the Step 1 Set the Motion Detection Area in the Section

6.6.1 Configuring Motion Detection.

 Record Triggered by Alarm

If you select Alarm, the video will be recorded when the alarm is triggered

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 102 103

No comments

Hikvision Digital Technology DS-2AE5168N-A User Manual Page 82